Products

New Process Steel is one of the largest, most respected processors and distributors of carbon steel products in North America. We provide a wide variety of top quality steel products, committed to the highest industry standards.

galvanized

Galvanized

To create galvanized steel, a thin layer of zinc is applied directly, coating both sides of the steel. Galvanized applications require a high degree of surface quality and formabiliy. At NPS, we can galvanize hot and cold rolled steel. Galvanized steel is used when rust resistance is required as it has heightened corrosion protection.

Sheet
Grades
CS-B · SS · DDS · EDDS · FS
Thicknesses
0.009" (32 Gauge) ⇔ 0.1591" (8 Guage)
Type
All Spangles · HDG/ElectoGalvanized · Dry/Oiled · Painted
Widths
6" ⇔ 72"
Coil
Grades
CS-B · SS · DDS · EDDS · FS
Thicknesses
0.0090" (32 Gauge) ⇔ 0.1591" (8 Guage)
Type
All Spangles · HDG/ElectoGalvanized · Dry/Oiled · Painted
Widths
<1" Slit ⇔ 72"
Utility Truck

Galvanneal

Galvanneal steel is coated with zinc on both sides using a continuous hot dip process. The zinc coating is post-annealed and is more resistant to scratching and manufacturing damage. Galvanneal sheet is specifically designed to be used in painted conditions. When painted with properly selected primers and paints, the combined paint/galvannealed coating offers unsurpassed resistance to peeling and/or blistering of the paint, compared with conventional galvanized sheet.

Sheet
Grades
CS-B · SS · DDS · EDDS · FS
Thicknesses
0.0187" (26 Gauge) ⇔ 0.1292" (10 Gauge)
Type
A40 · A60 · Others Available Upon Request
Widths
6" ⇔ 72"
Coil
Grades
CS-B · SS · DDS · EDDS · FS
Thicknesses
0.0187" (26 Gauge) ⇔ 0.1292" (10 Gauge)
Type
A40 · A60 · Others Available Upon Request
Widths
<1" Slit ⇔ 72"
galvalume

Galvalume

Galvalume is a 55% Al-Zn coated product that is ideally suited for most types of roofing and siding applications as well as unexposed automotive parts, appliances and miscellaneous applications like furniture, outdoor cabinetry, computer cases, gutters, pipe, etc.

Sheet
Grades
CS-B · SS · DDS · EDDS · FS
Thicknesses
0.0187" (26 Gauge) ⇔ 0.466" (18 Gauge)
Type
AZ50 · AZ55 · Others Available Upon Request
Widths
6" ⇔ 72"
Coil
Grades
CS-B · SS · DDS · EDDS · FS
Thicknesses
0.0187" (26 Gauge) ⇔ 0.4660" (18 Gauge)
Type
AZ50 · AZ55 · Others Available Upon Request
Widths
>1" Slit ⇔ 72"
stainless products

STAINLESS

Stainless Steel's corrosive resistant, low maintenence, and refined luster make it ideal for surface critical applications. Stainless Steel does not corode, stain, or rust like normal carbon based steel because it differs by the amount of chromium present. Stainless not only is appealing to the eye, it offers the same structual strengh as most steel.  We here at NPS utilize stainless steel's characterists in the appliance and food service indusrty.

Sheet
Grades
201 · 301 · 304 · 316 · 409 · 430 · 441
Thicknesses
0.0150" (28 Gauge) ⇔ 0.1870" (7 Gauge)
Type
2D · 3D · #3 · #4 · BA · PVC · Interleaf
Widths
6" ⇔ 72"
Coil
Grades
201 · 301 · 304 · 316 · 409 · 430 · 441
Thicknesses
0.0150" (28 Gauge) ⇔ 0.1870" (7 Gauge)
Type
2D · 3D · #3 · #4 · BA · PVC · Interleaf
Widths
<1" Slit ⇔ 72"
aluminum coils

Aluminum

At one-third the weight of steel, Aluminum is still very malleable, machinable, and has excellent corrosion resistance and longevity. From the transportation and construction industry to the can in your hand, Aluminum is one of the most abundant elements in Earth's crust.

Sheet
Grades
1100 · 3003 · 3105 · 5052
Thicknesses
0.005" (36 Gauge) Fin Stock ⇔ 0.190" (6 Gauge)
Type
H1X· H2X · H3X · Annealed · PVC · Interleaf
Widths
6" ⇔ 60"
Coil
Grades
1100 · 3003 · 3105 · 5052
Thicknesses
0.0050" (36 Gauge) Fin Stock ⇔ 0.1900" (6 Gauge)
Type
H1X· H2X · H3X · Annealed· PVC · Interleaf
Widths
<1" Slit ⇔ 60"
garage door

Painted

Painted steel is produced by a direct application of specialized paint on a coated or uncoated steel surface. The coil is cleaned, pre-treated, primed, and painted all in one continuous process.

For ultimate corrosion resistance, our painting is often done on metallic-coated steel including galvanized, galvannealed, galvalumed, cold rolled, and terne coated sheet.

Painted steel offer users a unique combination of advantages: Additonal Strength · Added Corrosion Resistance · Heightened Aesthetics · Increased Overall Longevity

cold rolled steel

COLD ROLLED

Cold Rolled Steel provides consistent and reliable product quality. Items manufactured from cold rolled steel require simple bends as well as parts with intense, deep-drawn requirements. Cold rolled steel is used when quality and appearance are crucial. The name “cold rolled steel” comes from the fact that the steel is kept below its recrystallization temperature during processing.

In fact, this process produces steel with tighter tolerances, higher surface quality and increased strength. When cold rolled steel is annealed, it produces steel that has a higher flexibility than hot rolled steel.

Sheet
Grades
CS-B · DDS · EDDS · DS-B · SS · 1008
Thicknesses
0.0169" (26 Gauge) ⇔ 0.1285" (10 Gauge)
Type
Matte Finish Light Oil, Perforated
Widths
6" ⇔ 72"
Coil
Grades
CS-B · DDS · EDDS · DS-B · SS · 1008
Thicknesses
0.0169" (26 Gauge) ⇔ 0.1285" (10 Gauge)
Type
Matte Finish Light Oil
Widths
<1" Slit ⇔ 72"
Oil Rig

Hot Rolled

Hot rolled steel provides strength and flexibility. Usually drawn parts or simple bends are made from hot rolled steel. It is popular because of its versatility which is why it is used in a wide range of applications where flexibility is vital.

Sheet
Grades
A36 · A572-50 · A606 · CS-B · 100XF · HSLA Gr 50/60 · HSLA-F Gr 50/60 · Abrasion Resistant · Aircraft Quality
Thicknesses
0.0598" (16 Gauge) ⇔ 0.1713" (7 Gauge)
Type
Dry · Laser Quality · P&O · SCS
Widths
1" slit ⇔ 72"
Coil
Grades
A36 · A572-50 · A606 · CS-B · 100XF · HSLA Gr 50/60 · HSLA-F Gr 50/60 · Abrasion Resistant · Aircraft Quality
Thicknesses
0.0598" (16 Gauge) ⇔ 0.1713" (7 Gauge)
Type
Dry · Laser Quality · P&O · SCS
Widths
36" · 48" · 60" · 72"